Basic Operation Q&A (PLK, XC-G Series)
- Home
- Contact
- Basic Operation Q&A (PLK, XC-G Series)
This page provides frequently asked questions and their answers about the industrial sewing machines.
Please feel free to contact us for your inquiry by the inquiry form.
Electronic Controlled Pattern Sewing Machine (PLK-G Series)
Basic Operations
How to use function signals in a sewing pattern?
Refer to “Code Data Input” and “Code List”.
Can it be used with a 100V power supply?
A power switch and a power source unit (trans) for 100V are required.
Please purchase a power source unit for 100V separately.
How to use up and down counter?
The standard screen 2 is displayed from “NEXT→” in the standard screen 1.
Check the program mode function table, and perform counter settings.
How to change the presser foot height?
Use “Thickness settings of sewing object” in the standard screen 1.
How to write or read system data on USB memory?
Check exporting (backup) and importing (restoring) settings.
How to import (read) sewing data?
Refer to the importing data (Read mode).
How to export (write) sewing data?
Refer to the exporting data (Write mode).
How to delete sewing data?
Refer to the data deletion (Read mode).
How to copy sewing data?
Refer to the copying sewing data.
How to check input and out put?
Refer to the input/output setting mode.
What kind of intermediate presser foot and needle holes are available?
Sewing Patterns
Can I create sewing data on a personal computer?
How to add a 2nd home position?
Enter the code data, “2HP” when inputting sewing data to create a sewing pattern with the 2nd home position.
Can I use the sewing patterns from the old series for the G series?
If the sewing pattern is for A series or later, it can be used.
After moving the sewing pattern of the old series to a USB memory with a personal computer,
import (Read) the sewing pattern to G series.
How to change the intermediate presser foot height to match the step in the middle of sewing?
A sewing object with different height can be set in the sewing pattern.
Lockstitch Machine (DY/LS/LT/LU/LX/LY Series)
Gauge Parts
About the gauge for two-needle lock stitch unison feed sewing machine.
About the gauge for two-needle lock stitch needle feed sewing machine.
Motor Pulleys and Belts
About motor pulleys and belts.
Check the list table of motor pulleys and V belts through the link below.
Motor Device (XC-G Series)
Basic Operations
How to switch from normal mode to each mode?
Switching to each mode is possible from the operation panel.
Click here for switching from the normal mode to each mode.
How to change settings for standing operation?
Check “Working in Standing Sewing Machine”.
How to start sewing with slow start?
Check the display and the name of each key at the normal mode.
How to operate without synchronizer?
Check “The Detector not Working” and “Operate the Sewing Machine without the Detector”.
Click here for “The Detector not Working” and “Operate the Sewing Machine without the Detector”.
How to do a half stitch with a touch-back switch?
Check “Operating a Half Stitch Sewing with a Touch Back”.
Click here for “Operating a Half Needle Sewing with a Touch Back”.
How to increase penetration?
Try making the motor pulley's diameter smaller or take measures by using the program mode.
Measures through the program mode
①Go to the program mode P (↓+↑), and set the function “RU” ON.
②Go to the program mode A (↓+A), and set the setting value of function “GA” to H.
③Go to the program K (↓+↑+A+C), and set the function “HWG” ON.
The number of stitch for backtacking does not match.
Check the setting of the number of stitch correction for backtacking.
Click here for the setting of the number of stitch correction for backtacking.
How to reduce the speed of backtacking?
Check the setting method of front stop stitch speed and rear stop stitch speed.
How to set the same number of stitches at the beginning and the end of backtacking?
Check the setting of the number of stitch for backtacking.
Click here for the setting of the number of stitch for backtacking.
How to reduce the brake setting?
Check the setting method of weaker brake.
About reading a 7-segment display.
Check the digital display list table.
About model settings.
Check how to use easy setting of program mode [1].
How to save and load the settings data?
Check “Saving Setting Data”.
About compatibility of control panels and detectors.
Check the detector compatibility.
Others
About the function of the program mode.
Check the function table of the program mode.
How to use the optional connectors?
Check how to use the option connector.
Can the motor be used for other than sewing machines?
No, it cannot be used.
Use as the motor of the sewing machine.
