Ti-Mo-N Coating Looper
- Home
- Services
- Optional parts
- Ti-Mo-N Coating Looper
Better Frictional Resistance, Better Thread Slip, New Loopers from JUKI.
Ti-Mo-N film surface treatment on the loopers provides low friction and wear resistance.Smooth thread feeding improves the quality of sewing.
Long Life
TiMoN film is a kind of titanium alloy coating film, which achieves long life like TiN or TiAIN.
The surface is covered with a film with high hardness to prevent wear.
Wear Test of Thread Path
Under the conditions of thread winding speed of 2m/s and sliding distance of 200m, spun threads were impregnated with abrasive to promote wear.
Low Resistance
Resistance between TiMoN film/DLC film/SCM carburized parts and 4 types of thread (spun, cotton, nylon, and wooly) measured.
| No. of TiMoN coating part |
No. of standard part |
Part name | Applicable model |
|---|---|---|---|
| 40237550 | 12968509 | LOOPER L | MS-1261/MS-1261M/ MS-1261A |
| 40237551 | 12968806 | LOOPER R | MS-1261/MS-1261M/ MS-1261A |
| 40237552 | 12969101 | LOOPER C | MS-1261/MS-1261M/ MS-1261A |
| 40237553 | B2030481000 | LOOPER | MH-480 Series |
| 40237556 | 13424809 | LOOPER | MF-7900, MF-7200D Series |
| 40237557 | 12120705 | CHAIN LOOPER | MO-6*16 |
| 40237559 | 13337902 | LOOPER | MF-7500 Series |
| 40246367 | B242621000B | NEEDLE HOLE GUIDE D=φ2.0 | AMS-E/EN Series |
| 40246368 | B242621000D | NEEDLE HOLE GUIDE D=φ2.4 | AMS-E/EN Series |
| 40246369 | B242621000F | NEEDLE HOLE GUIDE D=φ3.0 | AMS-E/EN Series |
| 40246467 | 11999307 | LOWER LOOPER | MO-6700 / MO-6900S Series |
| 40246468 | 12176004 | UPPER LOOPER | MO-6700 / MO-6900S Series |
| 40247112 | 12176103 | UPPER LOOPER | MO-6700 / MO-6900S Series |
| 40249863 | B2426280000 | NEEDLE HOLE GUIDE | LK-1900BN Series |
| 40257763 | 12176202 | UPPER LOOPER | MO-6*16 (for high lift model) |
| 40257815 | 11991908 | UPPER LOOPER | MO-6*04, 6*14 (for high lift model) |
| 40257816 | 11999802 | LOWER LOOPER | MO for thick thread |
LOOPER 40237550
LOOPER 40237551
LOOPER 40237552
LOOPER 40237553
