DDL-9000C Series Optional products

Applicable Models

Premium Digital

DDL-9000C-FDS (Medium weight / Fully-dry head)
DDL-9000C-FMS (Medium weight / Semi-dry)
DDL-9000C-FSH (Heavy-weight /Minute-quantity lubrication)

Digital

DDL-9000C-SMS (Medium weight / Semi-dry)
DDL-9000C-SSH (Heavy-weight / Minute-quantity lubrication)

1. Thickness sensor asm.

Parts No. : 40188622

Digital

Detects the thickness of the fabric at the stage automatically, and switches to the optimal sewing conditions set (pitch,feed locus,feed dog height). (It is necessary to change the software of the control panel.)

2. Micro lifting device asm. (with Dial adjustment )

Parts No. : 40194389

Digital

Simply adjust the micro lifting to improve the fabric feeding performance of difficult materials with a hand dial.

3. Presser spring for Light-weight material

Parts No.: 40199666

Premium Digital

Improved climbing force over steps and improved tracking performance for changes in material thickness.

4. Bird nest prevention device

This prevents bird nests at the start of sewing, which are generated by thread trimmer.
This product is a kit that can be added to the system.
(We also provide a variety of presser foot to suit the sewing application.)

Premium Digital

Digital

Backhold type
Parts No. : JSH-PBNB01

Side mounted type
Parts No. : JSH-PBNS01
(*for Digital only)

Standard Accessory
1. Thread tension regulator
2. Needle thread clamp unit
3. Control box + Dust box

5. Throat plate screw (Fixed pin type)

Parts No. : 40065552

Premium Digital

Digital

The fixing pin-type screw on the rear of the difficult-to-remove needle plate facilitates easy removal of the needle plate during maintenance.

6. Needle bar thread hook

Parts No. : 22970404

Premium Digital

Digital

This simplifies the troublesome threading operation to the needle bar thread guide. Encouraging proper threading of the operator to stabilize the sewing at the start/end and prevent the thread breakage.

7. Knee type lifting device (Electronic control)

Parts No. : 40206843

Premium Digital

Optional lifting with the knee in the premium digital (CF) specification is possible. Electronic control significantly reduces operator load compared to conventional manual operation.

8. Auto-lifter ak154 (Foot-pedal type)

Parts No. : 40174617

Digital

With the adoption of a pulse motor, the new automatic presser lifter reduced the pressure rise from 8.5 mm to a maximum of 13.5 mm, and the operation sound also became quiet.

*The premium digital specification is equipped with an auto lifting function.

  • Reducing operator load during operation
  • Essential parts for standing operation

9. Electric-fan hook cooling device

Parts No. : 40216380

Premium Digital

Digital

Reduces heat generation in the hook caused by high-speed continuous sewing.
Undercover mounting type does not interfere with bobbin replacement.

10. Turret presser bar

A presser bar that allows you to use 3 or 2 types of presser feet without replacement.
Rotate it and use the required presser foot.

  • 3-position presser foot holder assembly
    Parts No.: 40257811 (Premium Digital for DDL-9000C-F)
    Parts No.: MAS07300AA0 (Digital for DDL-9000C-S)
  • 2-position presser foot holder assembly
    Parts No.: 40257810 (Premium Digital for DDL-9000C-F)
    Parts No.: MAS173000A0 (Digital for DDL-9000C-S)

* No presser foot is included in the holder.
* It is necessary to adjust the height of the presser foot bar.

  • For multi-skilled operator
  • Multiple processes at smart lines, etc.

Presser bar cap (Premium Digital)

Handle carefully when removing.

品番:40172389

Premium Digital

Digital

11. Super-short thread gauge set (4-row)

Parts No.: 40197869 Target Model: S-Type(Medium weight)only
The remaining thread at the end of the sewing process can be shortened. (Remaining thread length 2.0-2.5 mm)
Variation may occur depending on the sewing conditions such as the thickness of the material.

Premium Digital

Digital

+

12. RP hook

  • RP hook (Non-lubricated hook)
    Parts No.: 22890206
  • RP hook-c (Non-lubricated hook/ with needle guard)
    Parts No.: 22890404

Premium Digital

Digital

The hook is used with the lubrication stopped, thereby preventing oil stains. The non-lubricated hook has a lace made of special plastic.

* The following two parts must be added to enable use of the non-lubricated hook in semi-dry head type machines or minute-quantity lubrication type machines.

  • Hook driving shaft stop-plug screw
    Parts No.: 11079506
  • O-ring
    Parts No.: RO036080200

13. Non-rotary bobbin

  • Hook asm. (for Non-rotary bobbin)
    Parts No.: 27003557
  • Bobbin case asm. (for Non-rotary bobbin)
    Parts No.: 27003755
  • Non-rotary bobbin
    Parts No.: 27003805

Premium Digital

Digital

The non-rotary bobbin eliminates irregular stitches which have a tendency to occur at some sewing speeds and bobbin-thread tension fluctuations which have a tendency to occur according to the bobbin thread remaining on the hook. Since the bobbin thread is fed without rotating the bobbin, the bobbin never idles.

* The non-rotary bobbin requires an exclusive hook, bobbin case and bobbin.

List of DDL9000C series optional products

"Provide" Can be fitted "-" Not applicable

No. Parts no. Description Premium Digital Digital
1. 40188622 Thickness sensor asm. Standard equipped Provide
2. 40194389 Micro lifting device asm. (with Dial adjustment) Digital Control Provide
3. 40199666 Presser spring for Light-weight material Provide -
4. JSH-PBNB01 Bird nest prevention device (Backhold type) Provide Provide
JSH-PBNS01 Bird nest prevention device (Side-mounted type) - Provide
5. 40065552 Throat plate screw (Fixed pin type) Provide Provide
6. 22970404 Needle bar thread hook Provide Provide
7. 40206843 Knee type lifting device (Electronic control) Provide Manual Control
8. 40174617 Auto-lifter ak-154 (Foot-pedal type) Standard equipped Provide
9. 40216380 Electric fan hook cooling device Provide Provide
10. 40257811 3-position presser foot holder assembly (for DDL-9000C-F) Provide -
MAS07300AA0 3-position presser foot holder assembly (for DDL-9000C-S) - Provide
40257810 2-position presser foot holder assembly (for DDL-9000C-F) Provide -
MAS173000A0 2-position presser foot holder assembly (for DDL-9000C-S) - Provide
40172389 Presser bar cap (for Premium Digital) Provide -
11. 40197869 Super short thread gauge set (4-row) Provide
(Medium weight only)
Provide
(Medium weight only)
12. 22890206 RP hook (Non-lubricated hook) Provide Provide
22890404 RP hook-c (Non-lubricated hook/with needle guard) Provide Provide
13. 27003557 Hook asm. (for Non-rotary bobbin) Provide Provide
27003755 Bobbin case asm. (for Non-rotary bobbin) Provide Provide
27003805 Non-rotary bobbin Provide Provide

Add to My List of WebPartsList

Parts added to the my list can be checked for price and availability, and can also be exported to Excel.
To add a part to the my list, simply turn on the 'My List' checkbox for the desired part and then press the 'Add to My List' button.
Please note that membership registration (Free Membership) is required to use the my list. Please click here for details.

My ListPart No.DescriptionPremium DigitalDigital
40188622Thickness sensor asm.Standard equippedProvide
40194389Micro lifting device asm. (with Dial adjustment)Digital ControlProvide
40199666Presser spring for Light-weight materialProvide-
JSH-PBNB01Bird nest prevention device (Backhold type)ProvideProvide
JSH-PBNS01Bird nest prevention device (Side-mounted type)-Provide
40065552Throat plate screw (Fixed pin type)ProvideProvide
22970404Needle bar thread hookProvideProvide
40206843Knee type lifting device (Electronic control)ProvideManual Control
40174617Auto-lifter ak-154 (Foot-pedal type)Standard equippedProvide
40216380Electric fan hook cooling deviceProvideProvide
402578113-position presser foot holder assembly (for DDL-9000C-F)Provide-
MAS07300AA03-position presser foot holder assembly (for DDL-9000C-S)-Provide
402578102-position presser foot holder assembly (for DDL-9000C-F)Provide-
MAS173000A02-position presser foot holder assembly (for DDL-9000C-S)-Provide
40172389Presser bar cap (for Premium Digital)Provide-
40197869Super short thread gauge set (4-row)Provide
(Medium weight only)
Provide
(Medium weight only)
22890206RP hook (Non-lubricated hook)ProvideProvide
22890404RP hook-c (Non-lubricated hook/with needle guard)ProvideProvide
27003557Hook asm. (for Non-rotary bobbin)ProvideProvide
27003755Bobbin case asm. (for Non-rotary bobbin)ProvideProvide
27003805Non-rotary bobbinProvideProvide

*To use the my list, membership registration (free membership) is required.

Catalog Download (PDF)

Inquiry for this option