1-needle, Bottom and Variable Top-feed, Lockstitch Machine with Automatic Thread Trimmer and Program Shirring Control Device

With its digital control, the machine achieves high-quality shirring with consistency.

Product features

  • The machine enables even inexperienced operators to perform shirring operation smoothly and easily

    The digital-controlled shirring mechanism allows even inexperienced operators to carry out shirring operations skillfully, producing high-quality products with consistency.
    While shirring, an operator can enter a program through the use of the teaching function, thereby duplicating a high-quality shirring operation performed program by a skilled operator.

  • The best seam quality is produced by low-tension sewing

    Through a thoroughgoing study of the sewing mechanism to enhance the machine's ability to respond flexibly to diversified kinds of materials, the DLU-5494N-7 is now able to perform low-tension sewing with even higher precision and quality. The machine produces beautifully finished seams with consistency while preventing sewing troubles such as puckering and uneven material feed.

  • Higher lift of the presser foot and upgraded operability

    The lift of the presser foot is as high as 13mm. The top feed amount can be easily adjusted by operating the panel. The machine incorporates a built-in top-feed mechanism which simplifies the area around the presser foot, thus allowing the operator to easily place and handle a material on the machine. The machine can be operated as the operator wants.

  • The thread trimmer cuts threads with high to low thread counts without fail

    Through the combined use of a moving knife and counter knife, the thread-trimming mechanism cuts thread with consistency. Any thread, ranging from high-to low-count thread, can be cut quickly without fail.

  • TARGETED INDUSTRIAL APPLICATIONS AND PROCESSES

    The machine is ready to be used for broader applications, such as men's wear, ladies' wear, jackets and baby clothes, increasing facility efficiency.

  • Dramatically improved functions and performance

    • The number of shirring programs has been increased to 16 different patterns. In addition, a maximum of 999 different patterns can be stored in the memory by the use of USB Memory in addition to the number of patterns stored in the main unit's memory.
    • The number of shirring process steps has been increased to a maximum of eight. The number of stitches and shirring amount can be preset for each step to allow the number of process steps to be added or deleted.
    • The process steps and shirring amounts are displayed on the IT-100A panel to offer improved operability.
    • By the use of the smoothing function, abrupt changes which take place when changing over the process steps can be reduced to achieve upgraded seam quality.
    • Once the data on one sleeve is programmed, the data for the other sleeve is automatically programmed by means of the mirroring function.
    • The machine has been provided with an alternating sewing function, which works in such a way that once the machine performs thread trimming after completion of the sewing of one sleeve, it automatically starts the sewing of the other sleeve (according to the mirrored data).

  • AN EXAMPLE OF INPUTTING A PROGRAM USING THE TEACHING FUNCTION

    Teaching function: The function which enables setting the number of stitches using the number of stitches actually sewn.
    This enables the quick and easy programming of data.

Specification

Model name DLU-5494N-7/ IT-100A
Max. sewing speed 4,000sti/min (normal 3,500sti/min)*
Max. stitch length 5mm (normal feed), 3mm (reverse feed)
Max. top-feed amount 8mm (top-feed amount varies depending on the type of gauge)
Needle bar stroke 30.7mm
Lift of the presser foot By hand: 5.5mm, By knee: 13mm (max.)
Needle
(at the time of delivery)
DB×1 (#14), For JE: 134 (Nm75)
Hook Automatic-lubricating full-rotary hook
Lubrication Automatic
Lubricating oil JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Automatic reverse
feed function
Provided as standard
Power requirement Single-phase 100~120V, 200~240V, 3-phase 200~240V
Power consumption Power rating 400VA
Total weight 83kg

*"sti/min" stands for "Stitches per Minute."

PROGRAMMING DEVICE PERFORMANCE

Function/Performance SC-922 / IT-100A
Input mode Manual Possible
Teaching Possible
Max. number of programs Main unit's 16 patterns
USB Memory Max. 999 patterns
Number of steps Max. 8 steps
Addition and deletion of steps Possible
Detailed data on steps
stored in memory
Shirring amount 0~8.0mm (in increments of 0.1mm)
Number of stitches 1~500 stitches ("0" means that the number of stitches is infinite.)
On-screen indication of stitch shape Possible
Smoothing function Possible / Effective between each of the two process steps.
Shirring amount for one stitch is set Possible / 0~8.0mm (in increments of 0.1mm)
Ratio of the shirring amount to the preset shirring amount to be placed for the first stitch is set Possible / Indications on the panel Value: 1~9 (10%~50%)
Mirroring function (inversion of data) Possible
Alternating sewing Possible

When you place orders

Gauge

DLU-5494N-7
For frilling (3 folds)

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER Applications / features
Figure
Specification P/N P/N P/N P/N
A Light weight B1109490E00 B1613490E00 B1524491AA0
(B1524490AA0)
B3026490A00 For attaching frills to aprons and pillows; With a tape guide attached to the presser foot, taking three holds.
The tape guide is sold separately.

For gathering

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER Applications / features
Figure
Specification P/N P/N P/N P/N
BA Light weight B1109450A0B B1613450A00 B1524491BA0
(B1524490BA0)
B3026490B00 For gathering stitch on female dress, blouse yoke, cuffs, etc.
BB Medium weight B1109450B0B Standard type
For preventing uneven material feed, and for shirring on medium-weight materials.
BC Heavy weight B1109450C0B For preventing uneven material feed, and for shirring on heavy-weight coat materials, etc.
BD   B1109450B0B
(B1109450A0B)
(B1109450C0B)
B1613450A00 B3026490B0D For preventing material scratch on quilted materials, nylon, taffeta, lining, female light-materials, etc.
The upper teeth are made of urethane rubber.
BE Medium weight B1109450B0B B1613450A00 B1524491BAE - A presser foot to use for regular lockstitch
BG Light weight B1109490E00 B1613490E00 B1524491EA0
(B1524490EA0)
B3026490B0G For preventing material scratch on quilted materials, nylon, taffeta, lining, female light-materials, etc.
The upper teeth are made of urethane rubber.
BJ Light weight B1109450G0B B1613450G00 B1524491BAJ
(B1524490BAJ)
B3026490B0J For gathering stitch on female dress, blouse yoke, cuffs, etc. For a narrow width (1-2 mm) gathering stitch for attaching blouse lace
BK Light weight B1109490E00 B3026490B0K B1524491BA0
(B1524490BA0)
B3026490B0K For preventing material scratch on quilted materials, nylon, taffeta, lining, female light-materials, etc. Gathering stitch is allowed.
BM Medium weight B1109450B0B
(B1109450A0B)
(B1109450C0B)
B1613450A00 B1524491BA0
(B1524490BA0)
B3026490B0M B3026490B00 (upper feed presser) with a coarse upper feed dog teeth (flat P=1.5mm); with enhanced feeding.
BP Medium weight B1524491BAP
(B1524490BAP)
B3026490B00 For shirt stitch (5mm right); While the right side of the BB type presser foot is widened, one side of the upper feed presser foot is cut as it interferes.
BT Medium weight B1524491BAT
(B1524490BAT)
B3026490B0T For hemming on shirts (1mm right); The stitch guide plate is fixed to the presser.
BU Heavy weight B1109490B0U B1613490B0U B1524491BA0
(B1524490BA0)
B3026490B00 For preventing the throat plate from being damaged when stitching corduroy materials, etc. 
The throat plate thickness of B1109450B0B is thickened (2 -> 3.2mm).
BV Light weight/
Medium weight
B1109450B0B
(B1109450A0B)
(B1109450C0B)
B1613490B0V B1524491BA0
(B1524490BA0)
B3026490B0D Effective for a narrow width feed dog gathering and puckering with the operator-side teeth unprocessed.
Urethane rubber upper feed dog
BW Light weight B1109450B0B
(B1109450A0B)
(B1109450C0B)
B1613450A00 B1524491BAW
(B1524490BAW)
B3026490B0W Suitable for tape gathering
BX Medium weight B1109450B0B B1613450A00 B1524491BA0
(B1524490BA0)
B3026490B0X B3026490B00 (upper feed presser foot) with an enhanced feeding by enlarged contact surface
BY Light weight B1109450G0B B1613450G00 B1524491BAJ
(B1524490BAJ)
B3026490B0Y B3026490B0J (upper feeding presser) with three-column teeth, preventing the cloth from being released.

For stitching

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER Applications / features
Figure
Specification P/N P/N P/N Figure P/N
C Light weight/ Medium weight B1109490D00 B1613490D00 B1524491CA0
(B1524490CA0)
B3026490C00 For various hemming seam for shirts, blouses, dresses, coats, jackets, etc. (stitching width 1mm with a right stepped presser)
CA Light weight/ Medium weight B1109490D00 B1613490D00 B1524491CAA
(B1524490CAA)
B3026490C00 For various hemming seam for shirts, blouses, dresses, coats, jackets, etc. (stitching width 2mm with a right stepped presser)
CB Light weight/ Medium weight B1109490D00 B1613490D00 B1524491CAB
(B152490CAB)
B3026490C00 For various hemming seam for shirts, blouses, dresses, coats, jackets, etc. (stitching width 3mm with a right stepped presser)
CC Light weight/ Medium weight B1109490D00 B1613490D00 B1524491CAC
(B1524490CAC)
B3026490C00 For various hemming seam for shirts, blouses, dresses, coats, jackets, etc. (stitching width 5mm with a right stepped presser)
CD Light weight/ Medium weight B1109490D00 B1613490D00 B1524491CAD
(B1524490CAD)
B3026490C00 For various hemming seam for shirts, blouses, dresses, coats, jackets, etc. (stitching width 1mm with a left stepped presser)
CE Heavy weight B1109490C0E B1613490C0E B1524491DA0 B3026490D00 For various runstitch of heavy-weight materials (with a thicker throat plate).
CF Light weight/ Medium weight B1109490D00 B1613490D00 B1524491CAF B3026490D0K For various hemming seam for shirts, blouses, dresses, coats, jackets, etc. (stitching width 0.8mm with a left stepped presser)
CG Medium weight B1524491CAG
(B1524490CAG)
B3026490D00 B1524490DA0 (presser foot) with higher R at the front and the back, preventing the cloth from jamming.
CH Light weight/ Medium weight B1524491CAH
(B1524490CAH)
B3026490D00 A type with stitch guides on both sides (stitching width 1.5mm for both right and left)
CJ Light weight/ Medium weight B1524491CAJ
(B1524490CAJ)
B3026490D00 B1524491DA0 (presser foot) with a modified needle location part (groove -> round hole). The bottom of the (lower) press can have piping grooves processed, enabling better flexible maneuvering performance to allow the piping jig to come closer to the high needle drop point.
CK Light weight/ Medium weight B1524491CAK
(B1524490CAK)
B3026490D00 For various stitching for shirts, blouses, dresses, jackets, etc. (stitching width 7mm with a left stepped presser)
CL Medium weight B1524491CAL
(B1524490CAL)
B3026490C0L For concealed seam under stitching on the female skirt waist belt
A type that drops from the surface side with the stitch guide plate (stepped presser)
CM Light weight/ Medium weight B15124491CAM
(B1524490CAM)
B3026490D00 For various stitching for shirts, blouses, dresses, jackets, etc. (stitching width 9mm with a right presser)
CN Light weight/ Medium weight B1524491CAN
(B1524490CAN)
B3026490D00 For various stitching for shirts, blouses, dresses, jackets, etc. (stitching width 6mm with a left stepped presser)
CQ Light weight/ Medium weight B1524491CAQ
(B1524490CAQ)
B3026490C00 A type with an enlarged contact surface of the upper feed (stitch width 1mm with a left stepped presser)
CR Light weight B1524491DAD
(B1524490DAD)
B3026490C0R B3026490D0D (upper feed presser), for preventing cloth scratch on quilted materials, nylon, taffeta, lining, female light-materials, with a urethane rubber heat-bonded on it.
CT Medium weight B1524491CAT
(B1524490CAT)
B3026490C0T A type that feeds the Cl-type narrow width type belt side with the upper feeding presser (stepped presser)
CU Light weight B1524491DA0
(B1524490DA0)
B3026490C0U B3026490D00 (upper feed presser), for preventing cloth scratch on quilted materials, nylon, taffeta, lining, female light-materials, with a urethane rubber heat-bonded on it.
CW Light weight/ Medium weight B1524491CAW
(B1524490CAW)
B3026490D00 B1524491DA0 (presser foot) with stitch guide part (stitch width 4mm)
CX Light weight/ Medium weight B15124491CAX
(B1524490CAX)
For various stitching for shirts, blouses, dresses, jackets, etc. (stitching width 6mm with a right presser)
CY Light weight/ Medium weight B1524491CAY
(B1524490CAY)
B3026490C00 A type with flexible maneuvering performance (stitch width 1mm with a right stepped presser)
CZ Light weight/ Medium weight B1524491CAZ
(B1524490CAZ)
B3026490C0Z Left stepped presser for 9mm stitch

For stitching

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER STITCH GUIDE SPRING Applications / features
Figure
Specification P/N P/N P/N Figure P/N P/N
D Light weight/ Medium weight B1109490D00 B1613490D00 B1524491DA0
(B1524490DA0)
B3026490D00 - For flexible maneuvering performance on stitching shirts and blouses, etc.
DA Light weight/ Medium weight B1524491DAA
(B1524491DAA)
For 2m/m B1527490D0A
For 5m/m B1527490D0B
Screw SS7060310SP
For various stitching for skirts, trouser belt stitching, etc. (stitching width 2mm)
DB Light weight/ Medium weight B1524491DAB
(B1524490DAB)
For various stitching for skirts, trouser belt stitching, etc. (stitching width 5mm)
DC Light weight/ Medium weight B1524491DAC
(B1524490DAC)
B3026490D0C - For various stitching for shirts, blouses, dresses, etc. (stitching width 1mm with a right stepped presser)
DD Light weight/ Medium weight B1524491DAD
(B1524490DAD)
B3026490D0D - For various stitching for hemming on shirts, blouses, etc. (stitching width 2mm with right stepped presser)
DE Light weight/ Medium weight B1524491DAE
(B1524490DAE)
B3026490D00 - For various stitching for shirts, blouses, dresses, coats, jackets, etc. (stitching width 3mm with a right stepped presser)
DF Light weight/ Medium weight B1524491DAF
(B1524490DAF)
- For various stitching for shirts, blouses, coats, skirts, jackets, etc. (stitching width 4mm with a right stepped presser)
DG Light weight/ Medium weight B1524491DAG
(B1524490DAG)
- For various stitching for shirts, blouses, coats, skirts, etc. (stitching width 5mm with a right stepped presser)
DJ Light weight/ Medium weight B1524491DAJ
(B1524490DAJ)
  3m/m B1527490D0J
6m/m B1528490D0J
Screw SS7060310SP
For various stitching for skirts, trouser, etc. (3mm with a stitch guide plate spring)
DK Light weight/ Medium weight B1524491DAK
(B1524490DAK)
B3026490D0K - For hemming seam for shirts, blouses, dresses, coats, jackets, etc. (stitching width 1mm with a left stepped presser)
DL Light weight/ Medium weight B1524491DAL
(B1524490DAL)
B3026490D00 - For various stitching for shirts, blouses, dresses, jackets, etc. (stitching width 7mm with a right presser)
DM Light weight/ Medium weight B1524491DAM
(B1524490DAM)
- For various stitching for shirts, blouses, dresses, jackets, etc. (stitching width 3mm with a left stepped presser)
DN Light weight/ Medium weight B1524491DAN
(B1524490DAN)
B3026490D0N - For hemming seam for shirts, blouses, dresses, coats, jackets, etc. (stitching width 2mm with a left stepped presser)
DP Light weight/ Medium weight B1524491DAP
(B1524490DAP)
B3026490D00 1.5m/m B1528490D0P
4m/m B1527490D0P
Screw SS7060310SP
For hemming seam for shirts, blouses, dresses, coats, jackets, etc. (1.5mm with a stitch guide spring)
DR Light weight/ Medium weight B1524491DAR
(B1524490DAR)
B3026490D0R - For piping stitching for dresses, blouses, one-piece dresses, coats, sport jackets, etc.
DS Light weight/ Medium weight B1524491D0S
(B1524490D0S)
B3026490D00 - For hemming seam for shirts, blouses, dresses, coats, jackets, etc. (stitching width 2.5mm)
DT Light weight/ Medium weight B1524491DAT
(B1524490DAT)
B3026490D0T - B3026490D00 (upper feeding presser) with a half width (stitch width 1mm with a right stepped presser)
DV Light weight/ Medium weight B1524491DAV
(B1524490DAV)
B3026490D00 2m/m B1527490D0V
5m/m B1528490D0V
Screw SS7060310SP
A reversed DA type (2mm with a stitch guide spring)
DW Light weight/ Medium weight B1524491DAW
(B1524490DAW)
B3026490D0W - For hemming seam for shirts, blouses, dresses, coats, jackets, etc. (stitching width 1.5mm with a left stepped presser)
DX Light weight B1109490D0X B1524491DA0
(B1524490DA0)
B3026490D00 - Throat plate with a smaller needle hole for light-weight materials
DZ Light weight/ Medium weight B1109490D00 B1524491DAZ
(B1524490DAZ)
B3026490C00 - For stitching collared-shirts runstitch; B1524491BA0 (presser foot) with a longer length (26mm -> 33mm).

For materials that are difficult to send

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER Applications / features
Figure
Specification P/N P/N P/N Figure P/N
E Medium weight B1109490E00
(B1109490E0D)
B1613490E00 B1524491EA0
(B1524490EA0)
B3026490B00 A type effective for elastic materials and brushing materials
EA Light weight B1109490E00 B1613490E0A B1613490E00 (feed dog), for preventing cloth scratch on quilted materials, nylon, taffeta, lining, female light-materials, with a urethane rubber heat-bonded on it
ED Light weight/
Medium weight
B1109490E0D B1613490E0D A throat plate with a wider feed dog with unprocessed operator-side teeth and a smaller needle hole diameter. Effective for gathering and puckering
EE Medium weight B1109490E0E B1613490E0E Improved version of E-type (cloth release prevention) Throat plate: four-ridged feed dog -> three-ridged feed dog Feed dog: four-ridged feed dog -> three-ridged diagonal feed dog

For stitch sewing

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER STICH GUIDE Applications / features
Figure
Specification P/N P/N P/N Figure P/N P/N
F Light weight/ Medium weight B1109490F00 B1613490F00 B1524491F00
(B1524490F00)
B3026490F00 - For various stitching for shirts, blouses, etc. (stitching width 5-12mm)
FA Light weight/ Medium weight B1524491F0A
(B1524490F0A)
- For various stitching for shirts, blouses, etc. (stitching width 6-12mm)
FB Light weight/ Medium weight B1524491F0B
(B1524490F0B)
B3026490D00 [A]B1524490FA0*
[B]SS6090520SP
For various stitching for shirts, blouses, etc. (stitching width 7-12mm)
*Max stitch width at 12m/m (by sliding the stitch guide)
FC Light weight/ Medium weight B1109490E00 B1613490E00 B1524491F0C
(B1524490F0C)
B3026490F0C [A]B1540490FA0*
[B]SS6090520SP
For D-type flexible maneuvering performance. A stitch guide can be attached (stitching width 6-12mm)
*Max stitch width at 12m/m (by sliding the stitch guide)
FD Light weight/ Medium weight B1109490F0D B1613490F0D B1524491F0D
(B1524490F0D)
B3026490F0D [A]B1540490FAD*
[B]SS6090520SP
FA type reverse type (stitch width 6-13mm)
Please refer to the item number chart of unsupported gauge.
*Max stitch width at 13m/m (by sliding the stitch guide)
FE Light weight/ Medium weight B1109490F00 B1613490F00 B1524491F0E
(B1524490F0E)
B3026490F0E [A]B1540490FA0*
[B]SS6090520SP
Effective for uneven pitch on various stitching on collars of various stitching on shirts, blouse, etc. (stitching width 6-12mm)
*Max stitch width at 12m/m (by sliding the stitch guide)
FG Light weight/ Medium weight B1109490F0G B1613490F0G B1524491F0G
(B1524490F0G)
B3026490F0G [A]B1540490FAG*
[B]SS6090520SP
Left presser for stitching (stitching width 1-8mm)
*Max stitch width at 8m/m (by sliding the stitch guide)
FJ Light weight B1109490F00 B1613490F00 B1524491F00
(B1524490F00)
B3026490F0J [A]B1540490FA0*
[B]SS6090520SP
B3026490F00 (upper feed presser), for preventing cloth scratch on quilted materials, nylon, taffeta, lining, female light-materials, with a urethane rubber heat-bonded on it (stitching width 5-12mm)
*Max stitch width at 12m/m (by sliding the stitch guide)
FL Medium weight B1109450J00A B1613490J00 B1524491F0L B3026490F0L [A]B1540490FAL*
[B]SS6090520SP
For zipper crest hemming coverstitching (stitching width 2-9.5mm)
*Max stitch width at 9.5m/m (by sliding the stitch guide)
FM Light weight/ Medium weight B1109490F00 B1613490F0M B1524491F00
(B1524490F00)
B3026490F00 [A]B1540490FA0*
[B]SS6090520SP
Feeding dog with F-type urethane rubber (stitching width 5-12mm)
*Max stitch width at 12m/m (by sliding the stitch guide)

For stitch sewing

Guage type Guage type THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER Applications / features
Figure
Specification P/N P/N P/N Figure P/N
GA Light weight/
Medium weight
B1109450G0B B1613450G00 B1524491GAA
(B1524490GAA)
B3026491G0A
(B3026490G0A)
A reverse type of M-type (stitch width 1mm with a right stepped presser)
GB Light weight/
Medium weight
B1524491G0B
(B1524490G0B)
B3026491G0B
(B3026490G0B)
For various stitching for shirts, blouses, etc. (stitching width 1.3mm)

For materials that are difficult to send

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER Applications / features
Figure
Specification P/N P/N P/N Figure P/N
H Light weight/
Medium weight
B1109490S00 B1613490S00A B1524491HA0
(B1524490HA0)
B3026490H00 For materials that are hard to feed, such as suede and vinyl HA-type presser foot with Teflon-lined
HA Light weight/
Medium weight
B1524491HAA
(B1524490HAA)
B3026490H00
(B302490H0A)
For materials that are hard to feed, such as suede and vinyl Effective for puckering as it holds the cloth firmly.

For fastener attachment (right only)

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER Applications / features
Figure
Specification P/N P/N P/N Figure P/N
J Medium weight B1109450J00A
(B1109490J00)
B1613450J00A B1524491JA0
(B1524490JA0)
B3026491J00
(B3026490J00)
For attaching fasteners to one-piece dresses, dresses, skirts, jumper jackets, etc.
JA Medium weight B1109450J00A B1524491J0A
(B1524490J0A)
B3026491J0A
(B3026490J0A)
For attaching fasteners to dresses, skirts, trousers, jumper jackets, etc.
JB Medium weight B1109450J00A
(B1109490J0B)
B1524491JAB
(B1524490JAB)
B3026490J0B For attaching fasteners to dresses, skirts, trousers, jumper jackets, etc.
JC Medium weight B1109450J00A B1524491JAC
(B1524490JAC)
B3026490J0C For attaching fasteners to one-piece dresses, dresses, skirts, sports ware, etc. Effective for preventing torsion.
JF Medium weight B1524491JAF
(B1524490JAF)
B3026490J0B For attaching fasteners to one-piece dresses, dresses, skirts, sports ware, etc. Effective when the cloth covers over the fastener.
JQ Medium weight B1109490D00 B1613490D00 B1524491J0G
(B1524490J0G)
B3026490J0G For attaching conceal fasteners to skirts, etc.
JJ Heavy weight B1109450J00A
(B1109490J00)
B1613490J00 B1524491JA0
(B1524490JA0)
B3026491J00
(B3026490J00)
A feed dog with a larger pitch and stronger feed force
JK Medium weight B1109490P00 B1613490P00 B1524491JAK
(B1524490JAK)
B3026490J0K Reversed JB-type A presser located right to the needle drop point
JL Medium weight B1109490P00 B1613490P00 B1524491JAL
(B1524490JAL)
B3026490J0K JK-type presser foot with altered needle drop point release form
JM Medium weight B1109450J00A B1613450J00A B1524491JAM
(B1524490JAM)
B3026490J0B For attaching fasteners to one-piece dresses, dresses, skirts, sports ware, etc.
JN Medium weight B1524491JAN
(B1524490JAN)
B3026491J0N
(B3026490J0N)
For attaching fasteners to one-piece dresses, dresses, skirts, sports ware, etc. A type to prevent cloth flapping
JP Light weight B1524491JAC
(B1524490JAC)
B3026490J0P For preventing material scratch on quilted materials, nylon, taffeta, lining, female light-materials, etc. B3029490J0C (upper feed presser) with a urethane rubber heat-bonded on it
JQ Light weight/
Medium weight
B1109450G0B B1613450G00 B1524491JAQ
(B1524490JAQ)
B3026490B00 For attaching fasteners (for a one-side presser 1mm right)
KA Light weight/
Medium weight
B1109490D00 B1613490D00 B1524491KAA
(B1524490KAA)
B3026490C00 A presser with a stitch guide spring (for 1.5mm left)
KB Light weight/
Medium weight
B1524491KAB B3026490D00 A presser with a stitch guide spring (for 3.6mm left) The stitch width converted by replacing the stitch guide.
KC Light weight/
Medium weight
B1109490E00 B1613490E00 B1524491K0C B3026490F0C A wiper attached to FC-type, preventing the stitch ruler (pair) from attaching (for 5mm stitch right)
KD Light weight/
Medium weight
B1109490K0D B1613490K0D B1524491KAD KC-type with a stitch guide spring (for 2mm right)
KE Light weight/
Medium weight
B1109490D00 B1613490D00 B1524491KAE B3026490C00 Left stepped presser for 1.5mm stitch
KF Light weight/
Medium weight
B1524491KAF Right stepped presser for 1.5mm stitch
KJ Light weight/
Medium weight
B1524491KAJ B3026490D00 Left stepped presser for 5mm stitch

For binding

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER Applications / features
Figure
Specification P/N P/N P/N Figure P/N
L Medium weight B1109490L00 MAT10903N00 B1524491LA0
(B1524490LA0)
B3026490D00 For binding stitching for dresses, one-piece dresses, coats, blazers, vests, etc.
LA Medium weight B1524491LAA
(B1524490LAA)
B3026490L0A For binding stitching for one-piece dresses, jackets, vests, dresses, etc. (stitch width 1.5mm left stepped presser)
LB Medium weight B1524491LAB
(B1524490LAB)
B3026490L0B For binding stitching for one-piece dresses, jackets, vests, dresses, etc. (stitch width 1.5mm left stepped presser)
LC Medium weight B1524491LAC
(B1524490LAC)
For binding stitching for one-piece dresses, jackets, vests, dresses, etc. (stitch width 1.5mm left stepped presser)
LE Medium weight B1109490L00 MAT10903N00 B1524491LAE
(B1524490LAE)
B3026490L0B For binding (stitch width 1mm)
LF Medium weight B1524491LAB
(B1524490LAB)
B3026490L0C Upper feed with enhanced feeding power (left stepped presser for 1.5mm stitch); the upper feed of B3026490L0B is adjusted to the right angle position from the diagonal position.
LN Medium weight B1524491LAN B3026491L0N Reversed LC type (right stepped presser for 1.5mm stitch)

For three rolls

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER Applications / features
Figure  
Specification P/N P/N P/N Figure P/N
M Medium weight B1109450G0B B1613450G00 B1524491MA0
(B1524490MA0)
B3026491M00
(B3026490M00)
For hem triple-winding shapes of one-piece dresses, dresses, coats, skirts, etc. (stitch width 1mm left stepped presser)
MA Medium weight B1524491MAA
(B1524490MAA)
Stepped presser for hem rubber triple-winding shapes of jumper jackets (stitch width 2mm left stepped presser)
MD Medium weight B1524491MAD
(B1524490MAD)
B3026491M0D
(B3026490M0D)
For hem triple-winding shapes of one-piece dresses, dresses, coats, skirts, etc.
MF Medium weight B1524491MAF
(B1524490MAF)
B3026491M0F
(B3026490M0F)
For hem triple-winding shapes of one-piece dresses, dresses, coats, skirts, etc.
MG Medium weight B1524491MA0
(B1524490MA0)
B3026491M0G
(B3026490M0G)
For preventing material scratch on quilted materials, nylon, taffeta, lining, female light-materials, etc. B3026490M00 (upper feed presser) with a urethane rubber heat-bonded on it
MH Medium weight B1524491MAH B3026491M0H
(B3026490M0H)
A type to prevent release of the triple-winding part with a modified box-shaped presser foot of M type (stitch width 1mm left stepped presser)

For piping

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER Applications / features
Figure
Specification P/N P/N P/N Figure P/N
N Light weight/
Medium weight
B1109450N0B B1613450N00 B1524491NA0
(B1524490NA0)
B3026490N00 For piping stitching for dresses, blouses, one-piece dresses, coats, sport jackets, etc.
NA Light weight/
Medium weight
B1613490N0A For piping stitching for dresses, blouses, one-piece dresses, coats, sport jackets, etc.

For piping

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER Applications / features
Figure
Specification P/N P/N P/N Figure P/N
P Medium weight B1109490P00 B1613490P00 B1524491PA0
(B1524490PA0)
B3026491P00
(B3026490P00)
For attaching fasteners to one-piece dresses, dresses, skirts, jumper jackets, etc. Processing allows close edge surface mm from the needle hole.
PA Medium weight B1109490P0A B1613490P0A For attaching apron fasteners to one-piece dresses, dresses, skirts, sports ware, etc.
PB Medium weight B1109490P0B B1613490P0B For attaching apron fasteners to one-piece dresses, dresses, skirts, sports ware, etc. A type with 20-degree of feed dog angle, improving forward feeding performance.
PC Medium weight B1613490P0C Reversed Pb-type feed dog
PD Medium weight B1109490P0D B1613490P00 For attaching apron fasteners to one-piece dresses, dresses, skirts, sports ware, etc.
PE Medium weight B1109490P00 B1524491PAE B3026491P0E
(B3026490P0E)
Reverse JN type, preventing cloth from flapping
PF Medium weight B1524491P0F
(B1524490P0F)
B3026491P00
(B3026490P00)
Reversed JA-type

A type that suppresses the fluttering of the cloth

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER Applications / features
Figure
Specification P/N P/N P/N Figure P/N
Q Light weight/
Medium weight
B1109490E00 B1613490E00 B1524491QA0
(B1524490QA0)
B3026490Q0A
 (knurl)
B3026490Q0B
(coarse)
A type that the presser feeds the whole circumference of the needle drop to the upper feed in order to prevent cloth flipping
QA Light weight/
Medium weight
B1524491QAA
(B1524490QAA)
A type that presses only one side Effective for attaching zippers to jumper jackets
R Light weight/
Medium weight
B1109490R00 B1613490R00 B1524491R00
(B1524490R00)
B3026490R00 Simple pattern type using the pattern guide for joining of cuffs of shirts and blouses feed dog teeth with urethane rubber
* Cut the upper side of the upper feeding presser as needed.

Effective for puckering type

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER Applications / features
Figure
Specification P/N P/N P/N Figure P/N
S Light weight B1109490S00 B1613490S00A B1524491SA0
(B1524490SA0)
B3026490S00 A type with advantages of both rake-in and cloth stitch types
SA Heavy weight B1613490S0A A type with larger feed dog pitch of the S-type. Effective for heavy-weight materials and elastic materials.
SB Light weight B3026490S00A B3026490S0B For preventing material scratch on quilted materials, nylon, taffeta, lining, female light-materials, etc. B3026490S00 (upper feed presser) with a urethane rubber heat-bonded on it
SC Light weight B1524491SAC
(B1524490SAC)
B3026490S00 This type allows to observe the needle drop point of S-type for runstitch of women's wear, thin dresses blouses, etc.

For velvet sewing

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER Applications / features
Guage
Specification P/N P/N P/N Figure P/N
V Velvet B1109450D0B B1613450E00 B1524491SA0
(B1524490SA0)
B3026490S00 Dedicated type for velvet sewing
*Please use with Attachment S135.

Waist belt for drop stitching

Guage type Guage THROAT PLATE FEED DOG PRESSER FOOT UPPER FEED PRESSER Applications / features
Figure
Specification P/N P/N P/N Figure P/N
W Medium weight B1109490W00 B1613490W00 B1524491WA0
(B1524490WA0)
B302649+H11W00
(B3026490W00)
For concealed seam under stitching on the female skirt waist belt. Concealed seam from the back.
*Please use with Attachment Q049.
WA Medium weight B1524491W0A
(B1524490W0A)
B3026491W0A
(B3026490W0A)
A type with the needle drop point closer to the Imber.
*Please use with Attachment Q049.