Loading...

Products

High-Speed Matrix tray server/Matrix Tray Server(Rear type)/Dual Tray Server/Matrix Tray Changer(In-line Type) TR Series Catalog download Contact

Matrix Tray Server(Rear type) TR8SR/TR8S

  • Rear mount tray server presents entire trays to the machine for direct picking (no intermediate shuttle hand off).
  • The space saving design tray server will allow the user to apply tape feeders also on the rear side of the machine. This design enables the rear side to supply both tray and tape components, and the improved component capability and productivity will realize more flexible and productive machine.
    Maximum number of tape feeder is 14 pieces for 8 mm tape. Wide type tape feeder is also available.
  • Maximum number of trays : 30(15 stacker×2)
 

High-speed Matrix Tray Server(Rear type) TR7D

  • Rear mount tray server presents entire trays to the machine for direct picking (no intermediate shuttle hand off).
  • Ideal for odd shaped components or ones with bottom side features that make shuttle handling difficult or impossible (such as connectors or some BGAs).
  • The new TR7D is equipped with conveyor units in both left and right side, capable of supplying a component in a tray alternately. This new method has increased the speed of sending out components by reducing the changeover time of a tray.
  • Maximum number of trays
    TR7D : 40
    TR7D(Non-stop mode) : 40(20×2)
 

 

Matrix Tray Server(Rear type) TR5S / TR5D

  • Rear mount tray server presents entire trays to the machine for direct picking (no intermediate shuttle hand off).
  • Ideal for odd shaped components or ones with bottom side features that make shuttle handling difficult or impossible (such as connectors or some BGAs).
  • TR5D model has dual tray magazines and is designed to run in non-stop mode. The operator can replenish one magazine while the MTS continues picking parts from the other.
  • Maximum number of trays
    TR5S : 40
    TR5D : 40
    TR5D(Non-stop mode) : 40(20×2)
 

 

Dual Tray Server(Rear type) TR1SNR / TR1EB / TR1RB

  • Compact and economical unit mounts to the rear feeder bank and still leaves space for other feeders.
  • Presents two trays of components (either the same or different part number) for direct picking by the machine.
  • Excellent for feeding of odd shaped components, not easily handled by shuttle type tray changers.
  • In non-stop mode the operator can replace one tray while the machine continues picking from the other.
  • Maximum number of trays
    Normal mode : 2
    Non-stop mode : 2(1×2)
 

Matrix tray Changer(In-Line type) TR6S / TR6D

  • Dual-shuttle type tray changer equipped with pass through conveyor.
  • Presents two components (same or different part number) simultaneously to the machines, greatly improving productivity.
  • No reduction in available feeder space.
  • TR6D model has dual tray magazines and is designed to run in non-stop mode. The operator can replenish one magazine while the MTC continues picking parts from the other.
    *TR6 series is not compatible with the CX-1.
  • Maximum number of trays
    TR6S : 20
    TR6D : 30
    TR6D(Non-stop mode) : 30(15×2)
 

 

Standard Features and Option

Standard
Tray Base Orientation Check Conveyor Delay Timer
Defective Part Return Function Signal tower
Option
Empty Tray Indicator Seesaw Nozzle
Waffle Pack Holder Automatic Conveyor Width Adjustment
Super Low Speed Mode Stacker with opening/closing cover
Inspection Conveyor Applicability to RFID function
Mechanical Gripper for FBGA  

* For applicable models, options and further details, contact us.

Contact