PRODUCTS

HZL-357ZP

HZL-357ZP

Electric Sewing Machine with 32-Stitch Patterns including Automatic 1-step Buttonhole.

タブコンテンツ1(オレンジ線下から)

Automatic Needle Threader

The Automatic Needle Threader easily threads the needle without eyestrain and allows you to start sewing quickly.

Automatic Needle Threader

Drop Feed

You can lower the feed dog for sewing button or free-motion quilting by simply moving the lever.
*Quilting foot is an optional part

Drop Feed

White LED Light

Brightens the needle entry area. LED light will not heat up even during long operations.

White LED Light

Automatic One-Step Buttonholing

By placing button on the buttonhole foot, the machine conveniently sews buttonholes automatically according to the size of the button.

Automatic One-Step Buttonholing

Presser Foot Pressure Adjustment

Presser foot pressure can be adjusted for better sewing results according to the type of materials to be sewn.

Presser Foot Pressure Adjustment

Free Arm and Accessory Box

The Auxiliary Box slides off for the free arm sewing. Also, standard accessory parts can be neatly stored in the Auxiliary Box.

Free Arm and Accessory Box

Other Features

・Extra front feed dogs
・Drop-in bobbin
・Zigzag width adjusting dial

Standard Accessories

Accessories

1. Standard presser foot, 2. Zipper foot, 3. Buttonhole foot, 4. Button sewing foot,
5. Screwdriver (L & S), 6. Spool pin felt, 7. Seam ripper/ brush, 8. Bobbin(3x),
9. Quilt guide, 10. Spool cap, 11. Auxiliary spool pin, 12. Pack of needles(3x)

Hard case

Hard case

タブコンテンツ1(オレンジ線上まで)
タブコンテンツ2(オレンジ線下から)

SPEC / ACCESSORIES

Control system(Arm size)Electric (Arm Size 162㎜)
Dimensions410(W) x 308(H) x 177(D)mm
Weight7.1kg (15.7LBS)
Maximum sewing speed750 sti/min
Number of stitch patterns32
ButtonholeAutomatic Buttonhole Length: - 3.0cm
Direct stitch pattern selection-
Start/stop button-
Adjustable starting / reverse stitch speed-
Auto thread trimming-
Thread cutter
Automatic needle threader
Thread tension systemStandard
Needle up/down button-
Low-speed inching sewing-
Needle stop position-
Needle stop position switching-
Lock stitchReverse stitch (Lever system)
Feed mechanism6 point feed dog
JUKI Smart Feed (dual feed function)-
Presser foot pressure adjustmentStepless adjustment
Auto presser foot lift system-
Micro-lifter-
Function to straight-line stitching-
Presser foot pivot function-
Presser foot lift (1 step/2 steps)Lever system: 6mm / 9mm
Horizontal presser foot holder button-
Drop feed
Quick bobbin preparation-
Easy bobbin winding (Bobbin winder with independent motor)-
Bobbin thread detection-
Stitch lengthDial system Max. 4mm
Stitch widthDial system Max. 7mm
Number of needle position (straight stitch/other than straight stitch)Stepless adjustment / -
Pattern reverse-
Twin needle sewing〇 (Twin needle is option)
Lock mode-
Elongation-
Save/call of patterns-
Light1 LED light
Type of hookHorizontal hook
Free arm
Cord reel-
Knee lifting lever-
Foot controller
Wide tableOption
Accessory storageAuxiliary bed
Sewing machine coverHard case
Operation supportDVD
Supported languages-
Accessories (presser feet)Standard presser foot Zipper foot Buttonhole foot Button sewing foot
Other accessories_1Screwdriver (L & S) Spool pin felt Seam ripper/ brush Pack of needles (3x) Bobbin (3x) Quilt guide Spool cap Auxiliary spool pin Hard case Power cord(Foot controller) Instruction manual Operation support DVD
Other accessories_2

INCLUDED ACCESSORIES

Standard Presser Foot

It can be used to sew lightweight to heavyweight materials.The wide needle entry opening allows this presser foot to be used for a variety of fabrics and applications, from straight stitches to zigzag stitches.

Buttonhole Presser Foot

You can sew buttonholes of the appropriate size by simply placing the button in the button holder of the presser foot.

Button Attaching Presser Foot

Be sure to first lower the feed dog so the fabric is not fed and adjust the zigzag width so the needle enters the holes in the button. To create a shank for the button, insert an awl or another similar object into the groove in the presser foot before sewing on the button so that the stitching will create a loop suitable for the thickness of the fabric.

Zipper Presser Foot

Since this presser foot has a pin on the left side and on the right side for attaching it to the presser foot holder, you can attach this presser foot on either side of the needle, depending on which side of the zipper is being sewn. This presser foot can cleanly sew along the edges of the zipper without hitting the teeth.

Movie

Quilt Guide

Insert this guide into the hole of the presser foot holder or the walking foot, and then sew while lightly tracing this guide along stitching. Adjust the spacing of the stitching by changing how far this guide is inserted.

Movie

Auxiliary Spool Pin (Additional Spool Pin)

Use this spool pin with a thread spool for twin needle sewing, spare machine threading or bobbin winding.

Foot Controller

Controlling the sewing machine with your foot leaves both of your hands free while sewing.

Bobbin

Since the bobbin type differs depending on your sewing machine model,be sure to use the bobbin designed for your machine.

OPTIONAL ACCESSORIES

Overcasting Presser Foot (Overedge Foot)

Sew with the edges of the fabric aligned with the guide. The prong in the opening of the presser foot presses down the edge of the fabric to prevent puckering. In addition, the amount of thread going into the stitching is adjusted by the thread crossing the prong, creating a clean finish with little shrinkage. This presser foot cannot be used to sew zigzag stitches or overcasting by 5-point zigzag.

Decorate Stitch Presser Foot (Manual BH Presser Foot/Satin Stitch Foot)

The groove along the bottom of this presser foot ensures that the presser foot does not catch on the stitching, ensuring the fabric will be smoothly fed. Use to accurately sew a buttonhole near a thick seam that is hard to reach. Also Used to Manually Create Oversize Buttonholes.

Movie

Adjustable Zipper Foot

The position of the adjustable zipper presser foot can be changed over to the right and left of the needle to allow the sewing machine to sew the material while avoiding its thicker part such as a zipper.

Blind Stitch Presser Foot with adjustment guide / Blind Hem Foot with adjustment guide

By sewing with the fabric fold aligned on the guide of this presser foot,only a few threads of the fabric will be uniformly caught in the stitch. Adjust the guide position according to the fabric before sewing.

Movie

Roller Foot

The rollers at the front and back of this presser foot prevent it from sticking to or bunching fabrics for perfect seams.

Movie

Rolled Hemming Presser Foot

The spiral guide of this presser foot rolls the edge of the fabric to create a narrow rolled hem. This presser foot can be used on light-weight to medium-weight fabric. Since the fabric can be uniformly folded twice without ironing, this presser foot is useful for finishing ruffles and handkerchief edges.

Movie

Straight Stitch Presser Foot

Since the needle drops into a small round opening, the seam is stabilized to create a perfect straight stitch.

Movie

Pintuck Foot Narrow

When sewing pintucks in parallel, the 9 slits on the bottom of the presser foot can be used as a guide. Pintucks are suited to light-weight soft materials. Pintucks of stable shape can be produced while putting a cord in each pintuck.

Pintuck Foot Wide

When sewing pintucks in parallel, the 7 slits on the bottom of the presser foot can be used as a guide. Pintucks are suited to light-weight soft materials. Pintucks of stable shape can be produced while putting a cord in each pintuck.

Walking Foot

This presser foot is equipped with an upper feed dog that works together with the feed dog of the sewing machine to feed the material in order to prevent bunched stitching and uneven feeding.

Movie

Quilt Presser Foot (Zigzag Type)

The wide needle entry opening allows this presser foot to be used for free-motion sewing with zigzag stitches. Since the presser foot moves up and down together with the movement of the needle, thick seams can easily be crossed.

Cording Presser Foot (for 3 Cords)

Pass threads through the three channels in front of the needle entry opening and sew them with the three-point zigzag stitch or decorative stitches in order to create three-dimensional decorations.

Movie

Gathering Foot

Change the stitch length, thread tension and presser foot pressure to adjust the amount of fabric that is gathered. You can also use this presser foot to sew two pieces of fabric together while creating gathers in only the lower piece.

Movie

Twin Needle

For beautiful decorative stitches two threads can be a perfect addition. Also it is used for sewing pintucks with the pintuck feet. Set the sewing machines with 2 needle settings with optional functions. Not all stiches are approved for twin needle design.

Magnetic Gauge

A strong magnet holds this gauge in place on the needle plate. This gauge can also be used on household sewing machines with a metal needle plate.

Movie

Wide Table

After removing the auxiliary bed, this table can easily be installed by fitting it into place.

タブコンテンツ2(オレンジ線上まで)
タブコンテンツ3(オレンジ線下から)

STITCH PATTERNS

STITCH PATTERNS

タブコンテンツ3(オレンジ線上まで)