Turret presser bar for DDL series
- Home
- Services
- Optional parts
- Turret presser bar for DDL series
Ideal for multi-product, small-lot production!
No need for replacement by the operator using a driver.
What is the turret presser bar?
A presser bar that allows you to use 3 or 2 types of presser feet without replacement. Rotate it and use the required presser foot.
Applicable models : DDL-9000CF, DDL-9000CS, DDL-8000A, DDL-8700-7, DDL-900C
Features of Turret presser bar
When sewing multiple processes with only one unit, there is no need to replace the presser foot.
You can simply sew by rotating it and selecting the required presser foot.
No tools such as a screwdriver are required to replace or adjust the presser foot.
The operator can prepare the desired presser foot easily and safely.
By attaching it to DDL-9000CF (premium digital), you can instantly switch to the sewing pattern (needle thread tension, presser foot pressure, feed dog height, feed locus, etc.) that matches the type and process of the presser foot to be used. Furthermore, the sewing adjustment time can be reduced.
Since the 2-position presser foot holder has a sufficient space between the presser foot, an edge guide can be used.
(Usage example of an edge guide)
Recommended process examples
Compatibility List
| Part No. of the turret presser foot assembly for lockstitch |
Model | |
|---|---|---|
| DDL-9000CF | DDL-9000CS, other DDL | |
| 3-position presser foot holder assembly | 40257811 | MAS07300AA0 |
| 2-position presser foot holder assembly | 40257810 | MAS173000A0 |
* No presser foot is included in the holder.
* It is necessary to adjust the height of the presser foot bar.
Cap of the presser bar (for premium digital)
Handle with care when removing it.
Part No.: 40172389
Product Photo
40257811
40257810
MAS07300AA0
MAS173000A0
