Computer-controlled Cycle Machine with Input Function

The maximum sewing speed of 2,800sti/min has been achieved.
The maximum sewing speed is reached by the 2nd stitch from the beginning of sewing.

Product features

  • The cycle machine achieves an improved seam quality, increased productivity and easier operation.

    The machine not only achieves higher productivity due to instantaneous increases/decreases in sewing speed at the beginning/end of sewing and increased speed of thread trimming, but also achieves a flexible responsiveness to materials to promise enhanced seam quality due to JIN’s unique active tension and programmable intermediate presser.

  • Improvement of seam quality

    The position of the feed can be checked during sewing by means of the encoder-controlled X-Y drive stepping motor. This remarkably improves accuracy of the feed. As a result, deformation of a sewing
    pattern which is likely to occur when sewing at a high speed or sewing a heavy-weight material is significantly reduced.

Basic performance

  • Active tension

    Market-proven active tension has been introduced to the needle thread tension controller. With the active tension, pinpoint changes in the needle thread tension during sewing are enabled.
    Therefore the needle thread tension can be set in conjunction with the material thickness and can be corrected according to the direction of sewing on a stitch-by-stitch basis through the operation
    panel. Since the needle thread tension is reproducible, supporting a wide range of sewing conditions, the time required for setup changing upon process changeover can be reduced.

  • Operation panel provided with programmable functions

    The large-sized LCD touch panel, which has been developed to ensure ease of operation, dramatically increases efficiency in edit work. The touch panel offers market-proven ease of operation. It is provided with a wide screen and programmable functions. Data can be input/edited while visually checking the needle movement. The color LCD unit displays sewing data such as sewing shape, need
    thread tension, enlargement/reduction ratio, sewing speed and the number of stitches at a glance.


  • Semi-dry head

    The frame (needle bar unit and thread take-up unit) is lubricated with grease, and the hook is supplied with a minute quantity of oil from the oil tank. JIN’s advanced dry technology protects your products from being stained with oil.

  • Programmable intermediate presser

    To support the sewing of multi-layered parts of materials, the lower dead point height of the intermediate presser can be changed steplessly during sewing (standard:0~3.5mm; maximum: 0~7.0mm). The intermediate presser will now be able to hold the material without fail, thereby preventing troubles in sewing, such as stitch skipping and thread breakage. Furthermore, flaws on the sewing product are prevented by maintaining the intermediate height as desired according to the material thickness.
    (The intermediate presser stroke is adjustable between 0 and 10mm.)



Model name NA-P3020HS
Sewing area X: 300mm Y: 200mm
Application Medium- to heavy-weight
Max. sewing speed 2,800sti/min*
Feeding frame type Monolithic feeding frame
Pneumatic feeding frame (lifting amount: 30mm)
Stitch length 0.1~12.7mm (0.05mm step)
Needle bar stroke 41.2mm
Lift / Stroke of the intermediate presser Lifting amount: 20mm / Stroke: Standard 4mm (0~10mm)
Variable lower position of the intermediate presser Standard 0~3.5mm (max. 0~7.0mm)
Needle thread tension Active tension (electronic thread tension control mechanism)
Needle DP×17 (#18)
Thread #50~2
Hook Double-capacity shuttle hook
Lubricating Semi-dry / hook section: minute-quantity lubrication (tank system)
Lubricating oil JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Compressed air / Air consumption 0.35~0.4 (max. 0.55) MPa, 1.8dm3/min (ANR)
Power requirementd Single-phase 200V-240V

*sti/min is the abbreviation for "stitches per minute"

When you place orders