• The cycle machine achieves an improved seam quality,increased productivity and easier operation

  The machine not only achieves higher productivity due to instantaneous increases/decreases in sewing speed at the beginning/end of sewing and increased speed of thread trimming, but also achieves a flexible responsiveness to materials to promise enhanced seam quality due to JIN’s unique active tension and programmable intermediate presser.

  

   

• Improvement of seam quality

  The position of the feed can be checked during sewing by means of the encoder-controlled X-Y drive stepping motor. This remarkably improves accuracy of the feed. As a result, deformation of a sewing pattern which is likely to occur when sewing at a high speed or sewing a heavy-weight material is significantly reduced.

  

• Active tension

  Market-proven active tension has been introduced to the needle thread tension controller. With the active tension, pinpoint changes in the needle thread tension during sewing are enabled. Therefore the needle thread tension can be set in conjunction with the material thickness and can be corrected according to the direction of sewing on a stitch-by-stitch basis through the operation panel. Since the needle thread tension is reproducible, supporting a wide range of sewing conditions, the time required for setup changing upon process changeover can be reduced.

  

• Operation panel provided with programmable functions

  The large-sized LCD touch panel, which has been developed to ensure ease of operation, dramatically increases efficiency in edit work. The touch panel offers market-proven ease of operation. It is provided with a wide screen and programmable functions. Data can be input/edited while visually checking the needle movement. The color LCD unit displays sewing data such as sewing shape, need thread tension, enlargement/reduction ratio, sewing speed and the number of stitches at a glance.

  

• Semi-dry head

  The frame (needle bar unit and thread take-up unit) is lubricated with grease, and the hook is supplied with a minute quantity of oil from the oil tank. JIN’s advanced dry technology protects your products from being stained with oil.

  

• Programmable intermediate presser

  To support the sewing of multi-layered parts of materials, the lower dead point height of the intermediate presser can be changed steplessly during sewing (standard: 0~3.5mm; maximum: 0~7.0mm). The intermediate presser will now be able to hold the material without fail, thereby preventing troubles in sewing, such as stitch skipping and thread breakage. Furthermore, flaws on the sewing product are prevented by maintaining the intermediate height as desired according to the material thickness. (The intermediate presser stroke is adjustable between 0 and 10mm.)

  

When you place orders