PRODUCTS
Overcasting Presser Foot (Overedge Foot)
Part No.40080960
Applicable models：HZL-UX8,DX-4000QVP,HZL-NX7,DX-3000QVP,DX-2000QVP,HZL-DX7,HZL-DX5,HZL-F600,HZL-F400,HZL-F300
This presser foot is used to sew overcasting in order to prevent the cut edges of fabric from fraying.
Sew with the edges of the fabric aligned with the guide. The prong in the opening of the presser foot presses down the edge of the fabric to prevent puckering. In addition, the amount of thread going into the stitching is adjusted by the thread crossing the prong, creating a clean finish with little shrinkage. This presser foot cannot be used to sew zigzag stitches or overcasting by 3-point zigzag.
Overcasting Presser Foot (Overedge Foot)
Part No.40110163
Applicable models：HZL-G220,HZL-G120,HZL-G210,HZL-G110
This presser foot is used to sew overcasting in order to prevent the cut edges of fabric from fraying.
Sew with the edges of the fabric aligned with the guide. The prong in the opening of the presser foot presses down the edge of the fabric to prevent puckering. In addition, the amount of thread going into the stitching is adjusted by the thread crossing the prong, creating a clean finish with little shrinkage. This presser foot cannot be used to sew zigzag stitches or overcasting by 4-point zigzag.
Overcasting Presser Foot (Overedge Foot)
Part No.40117901
Applicable models：HZL-K85,HZL-K65
This presser foot is used to sew overcasting in order to prevent the cut edges of fabric from fraying.
Sew with the edges of the fabric aligned with the guide. The prong in the opening of the presser foot presses down the edge of the fabric to prevent puckering. In addition, the amount of thread going into the stitching is adjusted by the thread crossing the prong, creating a clean finish with little shrinkage. This presser foot cannot be used to sew zigzag stitches or overcasting by 6-point zigzag.
Overcasting Presser Foot (Overedge Foot)
Part No.40169900
Applicable models：HZL-LB5100,HZL-LB5020
This presser foot is used to sew overcasting in order to prevent the cut edges of fabric from fraying.
Sew with the edges of the fabric aligned with the guide. The prong in the opening of the presser foot presses down the edge of the fabric to prevent puckering. In addition, the amount of thread going into the stitching is adjusted by the thread crossing the prong, creating a clean finish with little shrinkage. This presser foot cannot be used to sew zigzag stitches or overcasting by 5-point zigzag.
Overcasting Presser Foot (Overedge Foot)
Part No.40145869
Applicable models：HZL-HT740,HZL-HT710,HZL-80HP,HZL-70HW,HZL-60HR,HZL-357ZP,HZL-355ZW,HZL-353ZR
This presser foot is used to sew overcasting in order to prevent the cut edges of fabric from fraying.
Sew with the edges of the fabric aligned with the guide. The prong in the opening of the presser foot presses down the edge of the fabric to prevent puckering. In addition, the amount of thread going into the stitching is adjusted by the thread crossing the prong, creating a clean finish with little shrinkage. This presser foot cannot be used to sew zigzag stitches or overcasting by 5-point zigzag.
Overcasting Presser Foot (Overedge Foot)
Part No.40050948
Applicable models：HZL-29Z
This presser foot is used to sew overcasting in order to prevent the cut edges of fabric from fraying.
Sew with the edges of the fabric aligned with the guide. The prong in the opening of the presser foot presses down the edge of the fabric to prevent puckering. In addition, the amount of thread going into the stitching is adjusted by the thread crossing the prong, creating a clean finish with little shrinkage. This presser foot cannot be used to sew zigzag stitches or overcasting by 7-point zigzag.