JUKI SMT
SMT TOP|JUKI TOP
Sitemap|Japanese|Chinese
SMT Top News Products Download Customer Support Customer Satisfaction activities Giobal Network Contact
Top Products
tr series
Brochures
Contact
High-Speed Matrix Tray Server (Rear type) TR7D

Rear mount tray server presents entire trays to the machine for direct picking (no intermediate shuttle hand off).
The space saving design tray server will allow the user to apply tape feeders also on the rear side of the machine. This design enables the rear side to supply both tray and tape components, and the improved component capability and productivity will realize more flexible and productive machine.
Maximum number of tape feeder is 14 pieces for 8 mm tape. Wide type tape feeder is also available.


Applicable Models:RX-6
Maximum number of trays: 30(15 stacker ×2)

TR7D

High-Speed Matrix Tray Server (Rear type) TR7D
Rear mount tray server presents entire trays to the machine for direct picking (no intermediate shuttle hand off).
Ideal for odd shaped components or ones with bottom side features that make shuttle handling difficult or impossible (such as connectors or some BGAs).
The new TR7D is equipped with conveyor units in both left and right side, capable of supplying a component in a tray alternately. This new method has increased the speed of sending out components by reducing the changeover time of a tray.


Maximum number of trays
TR7D: 40
TR7D(Non-stop mode): 40(20×2)
TR7D

TR7D/supply part
Matrix Tray Server (Rear type) TR5S/TR5D
Rear mount tray server presents entire trays to the machine for direct picking (no intermediate shuttle hand off).
Ideal for odd shaped components or ones with bottom side features that make shuttle handling difficult or impossible (such as connectors or some BGAs).
TR5D model has dual tray magazines and is designed to run in non-stop mode. The operator can replenish one magazine while the MTS continues picking parts from the other.

Maximum number of trays
TR5S: 40
TR5D: 40
TR5D(Non-stop mode): 40(20×2)
TR5STR5D
TR5/supply part
Dual Tray Server (Rear type) TR1SNR/TR1EB
Compact and economical unit mounts to the rear feeder bank and still leaves space for other feeders.
Presents two trays of components (either the same or different part number) for direct picking by the machine.
Excellent for feeding of odd shaped components, not easily handled by shuttle type tray changers.
In non-stop mode the operator can replace one tray while the machine continues picking from the other.


Maximum number of trays
TR1SNR/TR1SEB : 2
TR1SNR/TR1SEB(Non-stop mode): 2(1×2)
TR1SNR
Matrix Tray Changer (In-line type) TR6S/TR6D
Dual-shuttle type tray changer equipped with pass through conveyor.
Presents two components (same or different part number) simultaneously to the machines, greatly improving productivity.
No reduction in available feeder space.
TR6D model has dual tray magazines and is designed to run in non-stop mode. The operator can replenish one magazine while the MTC continues picking parts from the other.
※TR6 series is not compatible with the CX-1.


Maximum number of trays
TR6S:20
TR6D:30
TR6D(Non-stop mode):30(15×2)
  TR6STR6D
TR6/supply part
Standard Features and Option TR5/TR6/TR1
Empty Tray Indicator (Option)
Waffle Pack Holder (Option)
Inspection Conveyor (Option)
Mechanical Gripper for FBGA (Option)
Seesaw Nozzle (Option)

Standard

Tray Base Orientation Check Conveyor Delay Timer
Defective Part Return Function Signal tower

Option

Empty Tray Indicator Seesaw Nozzle
Waffle Pack Holder Automatic Conveyor Width Adjustment
Super Low Speed Mode Stacker with opening/closing cover
Inspection Conveyor Applicability to RFID function
Mechanical Gripper for FBGA  
 
* For applicable models, options and further details, contact us.
>> Contact
Copyright JUKI CORPORATION. All Rights Reserved
JUKI Surface Mount Technology System