Smart Devices Skip Stitch Detector / Bobbin Thread Remaining Detector
/ Digital Tension / Cover Sensor Unit （LU-2800 Series PLC-2700 Series）
| Smart Devices | |
| Skip Stitch Detector / Bobbin Thread Remaining Detector / Digital Tension / Cover Sensor Unit | |
| （LU-2800 Series PLC-2700 Series） |
●Skip Stitch Detector：Stitch skipping is detected during sewing. This helps lighten the operator's inspection work load and also prevents defective products from being shipped.
●Bobbin Thread Remaining Detector：The buzzer sounds and the green lamp lights up when the amount of thread remaining on the bobbin reaches a predetermined length. It is also possible to stop.
●Digital Tension：Thread tension can be numerically controlled.Since the thread tension cannot be changed without a control box, a change in thread tension by the operator for personal preference is prevented.
●Cover Sensor Unit：① Eye guard with an open/close sensor ② Bed slide with an open/close sensor ③ Handwheel cover with an open/close sensor
LU-2810-7/CP-180/with smart devices
•LU-2800-7 Series
| Model | Skip Stitch Detector | Bobbin Thread Remaining Detector | Digital Tension(DT) | DT Control Box | Cover Sensor | Cover Sensor Unit*1 | Cable *2 |
|---|---|---|---|---|---|---|---|
| LU-2810-7 | 40175752 | 40153263 | 40153920 | 40152605 | 40171589 | 40175951 | |
| 40162088 | 40163832 | ||||||
| LU-2860-7 | 40175753 | 40153924 | 40173138 | 40175682 | 40177690 | ||
| 40162089 | 40163833 | ||||||
| LU-2828A-7 | 40175755 | 40153263 | 40153920 | 40171588 | 40171588 | ||
| 40162090 | 40163837 | ||||||
| LU-2818AL-7 | 40175754 | 40153263 | 40153920 | 40171589 | 40171589 | ||
| 40165240 | 40163836 | ||||||
*1.Please select if you want to use skip stitch detector and the bobbin thread remaining detector at the same time.
*2.Please select in the case of two devices or more with skip stitch detector,bobbin thread remaining detector and cover sensor unit.
•PLC-2700-7 Series
| Model | Skip Stitch Detector | Bobbin Thread Remaining Detector | Digital Tension(DT) | DT Control Box | Cover Sensor | Feed Lever Model Base Cover *1 | Cable *2 |
|---|---|---|---|---|---|---|---|
| PLC-2710-7 | 40175756 | 40153263 | 40153920 | 40165317 | - | 40175951 | |
| 40162091 | 40154826 | ||||||
| PLC-2760-7 | 40175757 | 40153924 | 40173138 | 40177729 | 40155443 （6mm） 40155445 （8mm） 40155447 （10mm） 40153488 （12mm） | ||
| 40162092 | 40153314 | ||||||
*1.If you want to order a cover sensor, please purchase two pieces of feed lever base cover that corresponds
to the width of the needle.
*2.Please select in the case of two devices or more with skip stitch detector,bobbin thread remaining detector
and cover sensor unit.
