The sewing machine complies with the "Juki Group Green Procurement Guidelines" (*2) on the use of hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive(*1) .
The sewing machine complies with the "Juki Group Green Procurement Guidelines" (*2) on the use of hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive(*1) .
DLN-9010A
（Direct-drive,High-speed,1-needle, Needle-feed,Lockstitch Machine with Automatic Thread Trimmer）
The sewing machine complies with the "Juki Group Green Procurement Guidelines" (*2) on the use of hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive(*1) .
●
The total number of parts of the DLN-9010A has been decreased as compared with that of the conventional model. In addition, the whole parts are shared with the parts of the conventional model (commonizing ratio: 100 %)
●
As compared with the conventional models, the mass of packaging has also been reduced by 7%.
The sewing machine complies with the "Juki Group Green Procurement Guidelines" (*2) on the use of hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive(*1) .
This sewing machine reduces power consumption by 52% as compared with the conventional models.
●
The sewing machine complies with the "Juki Group Green Procurement Guidelines" (*2) on the use of hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive(*1) .
●
As compared with the conventional model, the MF-3620(Direct-drive Hand-pulley type) Series reduces noise by 1.8dB and vibration by 1.3dB.
This sewing machine reduces power consumption by 22% as compared with the conventional models.
●
The sewing machine complies with the "Juki Group Green Procurement Guidelines" (*2) on the use of hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive(*1) .
●
The new LH-3500A-7 uses more common parts than the conventional models. In addition,the total number of parts have been reduced.
●
As compared with the conventional models, the new LH-3500A-7 Series has reduced its weight by 12% and its packing material weight by 18%.
★
The aforementioned description applies to the LH-3588A-7
(direct-drive sewing machine with automatic thread trimmer.
with organized split needle bar.
Large-hooks type).
Other LH-3500A-7 series (i.e.,LH-3528A-7/3568A-7/3578A-7)
are also JUKI ECO PRODUCTS certified products.
The sewing machine complies with the "Juki Group Green Procurement Guidelines" (*2) on the use of hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive(*1) .
●
The new LH-3500A uses more common parts than the conventional models. In addition, in the total number of parts and its weight have been reduced.
★
The aforementioned description applies to the LH-3588A
(direct-drive sewing machine without automatic thread trimmer.
with organized split needle bar.
Large-hooks type).
Other LH-3500A series (i.e.,LH-3528A/3568A/3578A)
are also JUKI ECO PRODUCTS certified products.
AC-172N-1790 series
（Computer controlled High-speed lockstitch buttonholing machine ）
The sewing machine complies with the "Juki Group Green Procurement Guidelines"(*2) on the use of hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive(*1) .
●
The AC-172N-1790 uses more common parts than the conventional models. In addition, recycling rate is also increased.
●
As compared with the conventional model, the AC-172N-1790 reduces noise by 1.5dB.
MF-7200D/UT42 series
(with electromagnetic type top and bottom thread trimming device)
This sewing machine reduces power consumption by 10% as compared with the conventional models.
●
The sewing machine complies with the "Juki Group Green Procurement Guidelines" (*2) on the use of
hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive(*1) .
●
As compared with the conventional model, the MF-7200D/UT42 Series reduces noise by 1.0dB.
MF-7200D/UT45 series
(with pneumatic type top and bottom thread trimming device)
This sewing machine reduces power consumption by 6% as compared with the conventional models.
●
The sewing machine complies with the "Juki Group Green Procurement Guidelines" (*2) on the use of hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive(*1) .
●
As compared with the conventional model, the MF-7200D/UT45 Series reduces noise by 1.0dB.
The sewing machine complies with the "Juki Group Green Procurement Guidelines" (*2) on the use of hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive(*1) .
●
As compared with the conventional model, the MF-7200D Series reduces noise by 2.2dB and vibration by 2.0dB.
●
As compared with the conventional model, the MF-7200D Series uses more common parts than the conventional models and has been reduced mass. And this series has been reduced by the use of packaging materials.
This sewing machine reduces power consumption by 16% as compared with the conventional models.
●
The sewing machine complies with the "Juki Group Green Procurement Guidelines" (*2) on the use of hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive(*1) .
●
As compared with the conventional models, the mass of unrecyclable parts of the sewing machine has been reduced. Additionally, the product mass of the control unit (control box and motor) has been reduced by 17%,and the mass of packaging has also been reduced by 17%.
This sewing machine reduces power consumption by 54% as compared with the conventional models.
●
The sewing machine complies with the "Juki Group Green Procurement Guidelines" (*2) on the use of hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive(*1) .
●
As compared with the conventional model, the MF-3620(Direct-drive type) reduces noise by 1.8dB and vibration by 1.3dB.
This sewing machine reduces power consumption by 32% as compared with the conventional models.
●
The sewing machine complies with the "Juki Group Green Procurement Guidelines" (*2) on the use of hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive(*1) .
●
As compared with the conventional model, the MF-3620(Belt-drive type) reduces noise by 2.1dB and vibration by 0.5dB.
This sewing machine reduces power consumption by 45% as compared with the conventional models.
●
The sewing machine satisfies the requirements stipulated in the "JUKI Group Green Procurement Guidelines*."And it certainly complies with the RoHS Directive*.
●
As compared with the conventional model, the AMS-221EN reduces noise by 1dB and vibration by 0.6dB.
This sewing machine reduces power consumption by 30% as compared with the conventional models.
●
The sewing machine satisfies the requirements stipulated in the "JUKI Group Green Procurement Guidelines*."And it certainly complies with the RoHS Directive*.
●
As compared with the conventional model, the AMS-210EN reduces noise by 3dB and vibration by 1dB..
This model has cleared "JUKI Group's Green Procurement Guideline"(*2), a set of standards stricter than the relevant international restrictions on the use of hazardous chemical substances (e.g., the RoHS Directive)(*1).
●
The introduction of a servomotor has reduced electrical power consumption by half, for improved energy-saving performance.
●
Through design adjustments in the mechanical balance, the vibration of the new model is reduced by 2 dB, as compared with the conventional model.
●
The number of man-hours required to manufacture the sewing machine has been reduced by 44%, contributing to reduced energy consumption during the production process.
This model has cleared "JUKI Group's Green Procurement Guideline"(*2), a set of standards stricter than the relevant international restrictions on the use of hazardous chemical substances (e.g., the RoHS Directive)(*1).
●
The introduction of a servomotor has reduced the electrical power consumption by 75%, as compared with the conventional model. (*)
●
Through design adjustments in the mechanical balance, the vibration of the new model is reduced by 9 dB, as compared with the conventional model.
●
The cabinet-retraction design of the stacker helps reduce the package size. As a result, the load capacity of a container for transportation has been increased by about 80%, as compared with the conventional model.
●
The number of man-hours required to manufacture the sewing machine has been reduced by 14%, contributing to reduced energy consumption during the production process.
※
Electrial power consumption compared with that of the conventional model, on the assumption that the quantity of production is equal.
This model has cleared "JUKI Group's Green Procurement Guideline"(*2), a set of standards stricter than the relevant international restrictions on the use of hazardous chemical substances (e.g., the RoHS Directive)(*1).
●
Through design adjustments in the mechanical balance, the vibration of the new model is reduced by 9 dB as compared with the conventional model.
●
The introduction of a servomotor has reduced the electrical power consumption by 75%, as compared with the conventional model. (*)
●
The cabinet-retraction design of the stacker helps reduce the package size. As a result, the load capacity of a container for transportation has been increased by about 50% as compared with the conventional model.
※
Electrial power consumption compared with that of the conventional model, on the assumption that the quantity of production is equal.
The sewing machine complies with the "Juki Group Green Procurement Guidelines" (*2) on the use of hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive(*1) .
A recycling ratio of about 87% has been accomplished.
●
The modified pulse motor driver and improved power supply reduce power consumption in standby mode by about 37%, as compared with the conventional model.
●
Power consumption during basic machine operation has been reduced by about 17%, as compared with the conventional model.
The products authorized as "JUKI ECO PRODUCTS" whose sale has been discontinued.
AMS-224E
(Authorized in April 2009)
Environmental criteria
●
This model has cleared "JUKI Group's Green Procurement Guideline"(*2), a set of standards stricter than the relevant international restrictions on the use of hazardous chemical substances (e.g., the RoHS Directive)(*1).
●
Grease lubrication has superseded oiling in the frame.
●
The adoption of a servomotor for the sewing machine and encoder-control for the stepping motor has reduced the electrical power consumption by 30%, as compared with the conventional model. (*)
●
The number of man-hours required to manufacture the sewing machine has been reduced by 20%, contributing to reduced energy consumption during the production process.
※
Electrial power consumption compared with that of the conventional model, on the assumption that the quantity of production is equal.
DDL-9000A/SC-910N/CP-170
(Authorized in April 2009)
Environmental criteria
●
This model has cleared "JUKI Group's Green Procurement Guideline"(*2), a set of standards stricter than the relevant international restrictions on the use of hazardous chemical substances (e.g., the RoHS Directive)(*1).
●
The M (semi-dry) type model no longer requires oiling in the frame (having adopted grease lubrication instead).
●
Compared with the conventional model equipped with a V-belt AC servomotor, the new model consumes 23% less electrical power. This is a significant improvement in energy-saving performance.
●
Through design adjustments in the mechanical balance, the new model produces 3.5 dB less noise than the conventional model.
※
This model has been awarded the Japan Good Design Award for 2008.
*1
RoHS Directive A European Directive to limit the use of 6 hazardous substances (lead, hexavalent chromium, mercury, cadmium, PBB, and PBDE) in electrical and electronic equipment. Products containing any of these substances at concentrations equal to or exceeding the permitted levels specified in the Directive are prohibited from being sold or distributed within the EU region.
*2
Juki Group Green Procurement Guideline
The parts-procurement guideline specified independently by JUKI.
The voluntary JUKI standards for 23 substances not to be included in products and 18 substance to be notified when included are set under this unique parts-procurement guideline.
